15DC200 200W Design Pro LED Controller

This describes the Z-Wave device 15DC200, manufactured by Kichler with the thing type UID of kichler_15dc200_00_000.

200W Design Pro LED Controller

Channels

The following table summarises the channels available for the 15DC200 200W Design Pro LED Controller.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Clock Time Offset time_offset time_offset Temperature Number
Switch 1 switch_binary1 switch_binary Switch Switch
Switch 2 switch_binary2 switch_binary Switch Switch
Switch 3 switch_binary3 switch_binary Switch Switch
Switch 4 switch_binary4 switch_binary Switch Switch
Switch 5 switch_binary5 switch_binary Switch Switch

Clock Time Offset

Automatic Update Offset

The number of seconds difference in the time before it is reset
Setting this will automatically update the devices clock when the time difference between the device, and the computer exceeds this number of seconds.

Property Value      
Configuration ID config_offset      
Data Type INTEGER      
Range 10 to 600   Default Value 60
Options Disable Auto Update (0)      

Device Configuration

The following table provides a summary of the configuration parameters available in the 15DC200 200W Design Pro LED Controller. Detailed information on each parameter can be found below.

| Parameter | Description | |————-|————-|


Did you spot an error in the above definition or want to improve the content? You can edit the database here.