The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

DZ1KD 1000W Dimmer

This describes the Z-Wave device DZ1KD, manufactured by Leviton with the thing type UID of leviton_dz1kd_00_000.

The DZ1KD supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the DZ1KD -:

Channel Channel Id Category Item Type
Dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number   Number

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel supports the Number item.

Device Configuration

The following table provides a summary of the 8 configuration parameters available in the DZ1KD. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Fade On Time Fade on time
2 Fade Off Time Fade off time
3 Minimum Light Level Minimum light level
4 Maximum Light Level Maximum light level
5 Preset Light Level Preset light level
6 LED Dim Level Indicator Timeout LED dim level indicator timeout
7 Locator LED Status Locator LED status
8 Load Type Load type
  Switch All Mode Set the mode for the switch when receiving SWITCH ALL commands

Parameter 1: Fade On Time

Fade on time

  • 0: Instant on
  • 1 to 127: 1-127 seconds
  • 128 to 253: 1-126 minutes Values in the range 0 to 253 may be set.

The manufacturer defined default value is 2.

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Fade Off Time

Fade off time

  • 0: Instant off
  • 1 to 127: 1-127 seconds
  • 128 to 253: 1-126 minutes Values in the range 0 to 253 may be set.

The manufacturer defined default value is 2.

This parameter has the configuration ID config_2_1 and is of type INTEGER.

Parameter 3: Minimum Light Level

Minimum light level

Values in the range 0 to 100 may be set.

The manufacturer defined default value is 10.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Maximum Light Level

Maximum light level

Values in the range 0 to 100 may be set.

The manufacturer defined default value is 100.

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 5: Preset Light Level

Preset light level

  • 0: Last dim level
  • 1 to 100: Level Values in the range 0 to 100 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_5_1 and is of type INTEGER.

Parameter 6: LED Dim Level Indicator Timeout

LED dim level indicator timeout

  • 0: LED indicators off
  • 1 to 254: Timeout in seconds
  • 255: Always on Values in the range 0 to 255 may be set.

The manufacturer defined default value is 3.

This parameter has the configuration ID config_6_1 and is of type INTEGER.

Parameter 7: Locator LED Status

Locator LED status

  • 0: LED off
  • 254: Status mode
  • 255: Locator mode Values in the range 0 to 255 may be set.

The manufacturer defined default value is 255.

This parameter has the configuration ID config_7_1 and is of type INTEGER.

Parameter 8: Load Type

Load type

  • 0: Incandescent
  • 1: LED
  • 2: CFL Values in the range 0 to 2 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_8_1 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -: | Value | Description | |——–|————-| | 0 | Exclude from All On and All Off groups | | 1 | Include in All On group | | 2 | Include in All Off group | | 255 | Include in All On and All Off groups |

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The DZ1KD supports 1 association group.

Group 1: Group 1

Z-Wave Plus Lifeline This group supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_SWITCH_MULTILEVEL_V3 Linked to BASIC
COMMAND_CLASS_SWITCH_ALL_V1  
COMMAND_CLASS_SCENE_ACTIVATION_V1  
COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1  
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1  
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1  
COMMAND_CLASS_ZWAVEPLUS_INFO_V1  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_POWERLEVEL_V1  
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1  
COMMAND_CLASS_HAIL_V0  
COMMAND_CLASS_ASSOCIATION_V2  
COMMAND_CLASS_VERSION_V2  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.