WAPIRZ-1 PIR Motion Detector

This describes the Z-Wave device WAPIRZ-1, manufactured by Linear Corp with the thing type UID of linear_wapirz_00_000.

PIR Motion Detector

Channels

The following table summarises the channels available for the WAPIRZ-1 PIR Motion Detector.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Sensor (temperature) sensor_temperature sensor_temperature Temperature Number
Alarm (burglar) alarm_burglar alarm_burglar Door Switch
  battery-level system.battery-level    

Sensor (temperature)

Scale

Select the scale for temperature readings

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Device Configuration

The following table provides a summary of the configuration parameters available in the WAPIRZ-1 PIR Motion Detector. Detailed information on each parameter can be found below.

Parameter Description
1: Re-trigger Wait Time Re-trigger Wait Time
1: Group 1  

1: Re-trigger Wait Time

Re-trigger Wait Time

Overview

By default, to conserve battery life, after the WAPIRZ-1 detects motion it cannotbe re-triggered by motion again for 3 minutes. Each time motion is detected(even during this wait time) the 3 minute timer starts over.

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 1 to 255
Default Value 3

1: Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.