TPS412 Touch Panel Switch 2 Channel

This describes the Z-Wave device TPS412, manufactured by McoHome Technology Co., Ltd with the thing type UID of mcohome_tps412_00_000.

Touch Panel Switch 2 Channel

Channels

The following table summarises the channels available for the TPS412 Touch Panel Switch 2 Channel.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Switch 1 switch_binary1 switch_binary Switch Switch
Switch 2 switch_binary2 switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the TPS412 Touch Panel Switch 2 Channel. Detailed information on each parameter can be found below.

Parameter Description
1: Saving state before power failure Switch state saved or not when power down
1: Switch Button Group 1  
2: Switch Button Group 2  
3: All Status Reports  

1: Saving state before power failure

Switch state saved or not when power down

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Enabled (1)      

1: Switch Button Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Switch Button Group 2

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: All Status Reports

Property Value
Configuration ID group_3
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.