5082xx Battery Powered Wall Controller MOVE

This describes the Z-Wave device 5082xx, manufactured by Merten with the thing type UID of merten_5082xx_00_000.

Battery Powered Wall Controller MOVE

Channels

The following table summarises the channels available for the 5082xx Battery Powered Wall Controller MOVE.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the 5082xx Battery Powered Wall Controller MOVE. Detailed information on each parameter can be found below.

Parameter Description
4: Switching single-surface  
44: Doorbell function  
52: LOWER shutter as long as button is pressed Direction of movement changes after each switching process
54: Move shutter single-surface  
55: RAISE shutter as long as button is pressed  
1: Button  

4: Switching single-surface

Property Value
Configuration ID config_4_1
Data Type INTEGER
Range 0 to 127
Default Value 0

44: Doorbell function

Property Value
Configuration ID config_44_1
Data Type INTEGER
Range 0 to 127
Default Value 0

52: LOWER shutter as long as button is pressed

Direction of movement changes after each switching process

Property Value
Configuration ID config_52_1
Data Type INTEGER
Range 0 to 127
Default Value 0

54: Move shutter single-surface

Property Value
Configuration ID config_54_1
Data Type INTEGER
Range 0 to 127
Default Value 0

55: RAISE shutter as long as button is pressed

Property Value
Configuration ID config_55_1
Data Type INTEGER
Range 0 to 127
Default Value 0

1: Button

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.