PAN06 In Wall Dual Relay(1 Way) Switch Module 2x 1.5kW

This describes the Z-Wave device PAN06, manufactured by Philio Technology Corp with the thing type UID of philio_pan06_00_000.

In Wall Dual Relay(1 Way) Switch Module 2x 1.5kW

Channels

The following table summarises the channels available for the PAN06 In Wall Dual Relay(1 Way) Switch Module 2x 1.5kW.

Channel	Channel Id	Channel Type UID	Category	Item Type
Switch	switch_binary	switch_binary	Switch	Switch
Alarm	alarm_general	alarm_general	Door	Switch
Switch 1	switch_binary1	switch_binary	Switch	Switch
Switch 2	switch_binary2	switch_binary	Switch	Switch
Switch 3	switch_binary3	switch_binary	Switch	Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the PAN06 In Wall Dual Relay(1 Way) Switch Module 2x 1.5kW. Detailed information on each parameter can be found below.

Parameter	Description
1: Selected endpoint	If Controller not using Multi_Channel command class to access the endpoint of PAN06, you …
2: Switch mode	Change the external switch mode
1: Relay 1 + 2
2: Relay 1
3: Relay 2

1: Selected endpoint

If Controller not using Multi_Channel command class to access the endpoint of PAN06, you may configure the endpoint value to react the Basic Command Class

Property	Value
Configuration ID	config_1_1
Data Type	INTEGER		Default Value	1
Options	Relay 1 + 2 (1)
	Relay 1 (2)
	Relay 2 (3)

2: Switch mode

Change the external switch mode

Property	Value
Configuration ID	config_2_1
Data Type	INTEGER		Default Value	1
Options	Edge mode (1)
	Pulse mode (2)
	Edge-Toggle mode (3)

1: Relay 1 + 2

Property	Value
Configuration ID	group_1
Data Type	TEXT
Range	to

2: Relay 1

Property	Value
Configuration ID	group_2
Data Type	TEXT
Range	to

3: Relay 2

Property	Value
Configuration ID	group_3
Data Type	TEXT
Range	to

---

Did you spot an error in the above definition or want to improve the content? You can edit the database here.