PSE02 Siren

This describes the Z-Wave device PSE02, manufactured by Philio Technology Corp with the thing type UID of philio_pse02_00_000.

Siren

Channels

The following table summarises the channels available for the PSE02 Siren.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Start sound notification_send notification_send   Number

Device Configuration

The following table provides a summary of the configuration parameters available in the PSE02 Siren. Detailed information on each parameter can be found below.

Parameter Description
7: Costumer Function NotificationReport/BinaryReport
29: Disable Alarm Disable the alarm function.
31: Alarm Duration  

7: Costumer Function

NotificationReport/BinaryReport

Overview

Customer function switch, using bit control. 0       Bit4: Notification Type,       0: Using Notification Report.   1: Using Sensor Binary Report.

Property Value
Configuration ID config_7_4
Data Type INTEGER
Range 0 to 65535
Default Value 4

29: Disable Alarm

Disable the alarm function.

Overview

Disable the alarm  function. 1: Disable  Alarm, 0: Enable Alarm.  Caution: After the power  up, this configuration is  always 0.

Property Value
Configuration ID config_29_4
Data Type INTEGER
Range 0 to 4294967295
Default Value 0

31: Alarm Duration

Property Value
Configuration ID config_31_4_0000000C
Data Type INTEGER
Range 0 to 127
Default Value 6

Did you spot an error in the above definition or want to improve the content? You can edit the database here.