PSR04 Smart Color Button

This describes the Z-Wave device PSR04, manufactured by Philio Technology Corp with the thing type UID of philio_psr04_00_000.

Smart Color Button

Wakeup Information

By default, this device only wakes up every 86400 seconds (24 hours). To manually wake this device up:

  1. Hold the device vertically, or against a wall (this will not work if the device is horizontal).
  2. Rotate the wheel so that the pointer is at the top of the device.
  3. Wait at least three seconds.
  4. Rotate the wheel clockwise through 180 degrees to the bottom of the device.
  5. Immediately press the centre button once.

This activates the wakeup for 10 seconds, during which time you will be able to identify the device correctly.

Channels

The following table summarises the channels available for the PSR04 Smart Color Button.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number scene_number   Number
  battery-level system.battery-level    

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the PSR04 Smart Color Button. Detailed information on each parameter can be found below.

Parameter Description
1: Basic Set OFF level Control the value represented by the left-side in area D.
2: Basic Set ON level Control the value represented by the right-side in area D.
10: Auto Report Battery Time The interval time for auto reporting the Battery level.
25: Customer Function Bit 0: Dimmer setting method. Bit 1: Disable buzzer in timer mode.
26: Disable Scene Holding report Send Central Scene Holding when the button is held.
1: Controller updates For receiving the report message, like the battery level.
2: Light control For light control. The device will send Basic Set command to this group.

1: Basic Set OFF level

Control the value represented by the left-side in area D.

Overview

 E.g. Setting this configuration to 0x0F means range of Command Basic Set value start from 0x0F.

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 0 to 99
Default Value 0

2: Basic Set ON level

Control the value represented by the right-side in area D.

Overview

 E.g. Setting this configuration to 0x1E means range of Command Basic Set value start from 0x1E.

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 0 to 99
Default Value 99

10: Auto Report Battery Time

The interval time for auto reporting the Battery level.

Overview

0: Function is disabled.
1 - 127: Define the time interval.

0 means turn off auto report battery. The default value of 12 is equivalent to 6 hours.

Property Value
Configuration ID config_10_1
Data Type INTEGER
Range 0 to 127
Default Value 12

25: Customer Function

Bit 0: Dimmer setting method. Bit 1: Disable buzzer in timer mode.

Property Value
Configuration ID config_25_1
Data Type INTEGER
Range 0 to 1
Default Value 0

26: Disable Scene Holding report

Send Central Scene Holding when the button is held.

Property Value      
Configuration ID config_26_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  Enable (1)      

1: Controller updates

For receiving the report message, like the battery level.

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Light control

For light control. The device will send Basic Set command to this group.

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.