009402 10 Year Smoke Detector with Siren Function

This describes the Z-Wave device 009402, manufactured by Popp & Co with the thing type UID of popp_009402_00_000.

10 Year Smoke Detector with Siren Function

Channels

The following table summarises the channels available for the 009402 10 Year Smoke Detector with Siren Function.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm (general) alarm_general alarm_general Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the 009402 10 Year Smoke Detector with Siren Function. Detailed information on each parameter can be found below.

Parameter Description
1: Siren alarm sequence interval The additional siren is creating a different acoustic signal differentiate from the smoke …
2: Siren alarm tone length The additional siren is creating a different acoustic signal differentiate from the smoke …
3: Value of On-Command  
4: Value of Off-Command  
1: Lifeline  
2: Alarm Reports  
3: Switching Command when Alarm  

1: Siren alarm sequence interval

The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the interval in seconds.

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 3 to 129
Default Value 10

2: Siren alarm tone length

The additional siren is creating a different acoustic signal differentiate from the smoke alarm. This sound is partly on and partly off. This parameter defines the total length of the sound versus silence within this interval.

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 1 to 99
Default Value 8

3: Value of On-Command

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 0 to 99
Default Value 99

4: Value of Off-Command

Property Value
Configuration ID config_4_1
Data Type INTEGER
Range 0 to 99
Default Value 99

1: Lifeline

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Alarm Reports

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: Switching Command when Alarm

Property Value
Configuration ID group_3
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.