POPE700052 Water Leakage Sensor

This describes the Z-Wave device POPE700052, manufactured by Popp & Co with the thing type UID of popp_pope700052_00_000.

Water Leakage Sensor

Channels

The following table summarises the channels available for the POPE700052 Water Leakage Sensor.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm (flood) alarm_flood alarm_flood Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the POPE700052 Water Leakage Sensor. Detailed information on each parameter can be found below.

Parameter Description
1: Flood Alarm Basic On Value Flood detected
2: Flood Alarm Basic Off Value No Flood detected
3: Enable Buzzer Sound on Alarm Buzzer enabled during flood detection
1: Lifeline  
2: Water is detected  

1: Flood Alarm Basic On Value

Flood detected

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 0 to 255
Default Value 255

2: Flood Alarm Basic Off Value

No Flood detected

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 0 to 255
Default Value 0

3: Enable Buzzer Sound on Alarm

Buzzer enabled during flood detection

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 0 to 1
Default Value 1

1: Lifeline

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Water is detected

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.