Duwi Z-Wave Plugin Switch Indoor/Outdoor Wall Plug Switch

This describes the Z-Wave device Duwi Z-Wave Plugin Switch, manufactured by Reitz-Group.de with the thing type UID of reitz_duw064381_00_000.

Indoor/Outdoor Wall Plug Switch

Channels

The following table summarises the channels available for the Duwi Z-Wave Plugin Switch Indoor/Outdoor Wall Plug Switch.

Channel	Channel Id	Channel Type UID	Category	Item Type
Switch	switch_binary	switch_binary	Switch	Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the Duwi Z-Wave Plugin Switch Indoor/Outdoor Wall Plug Switch. Detailed information on each parameter can be found below.

Parameter	Description
1: LED indication mode	Set LED indication mode.
2: Automatically switch off after x seconds.	If not zero, automatically switch device off after a user defined time
3: What to do on RF off command.	Defines how to interpret RF Off-Command.
5: Restore switch state after power cycle.	Defines if the switch should restore switch state.
20: Specify the consumption of the load in watts	Maximum load 3500 Watts
21: LED Off color	Color for Off state.
22: LED On color.	Color for On state.
1: Send Reports on switch state change.
2: Controlled by buttons

1: LED indication mode

Set LED indication mode.

Property	Value
Configuration ID	config_1_1
Data Type	INTEGER		Default Value	1
Options	Disabled (0)
	Show switch state (default) (1)
	Operated by Indicator Command Class (2)

2: Automatically switch off after x seconds.

If not zero, automatically switch device off after a user defined time

Overview

If not zero, automatically switch device off after a user defined time.

• 0 -> Disabled
• 1 - 65535 -> Enabled, automatically switch off after x seconds.

Property	Value
Configuration ID	config_2_1
Data Type	INTEGER
Range	0 to 255
Default Value	0

3: What to do on RF off command.

Defines how to interpret RF Off-Command.

Overview

Can be used in conjunction with Auto Off function:

• Ignore – to switch on the light by motion detectors and switch it off after some amount of time: in case of multiple motion detectors each would try to switch the light off that would break logics;
• Switch on – to switch on the light on both ON and OFF paddle press on the remote and switch it off after some amount of time.
• Button OFF click will still work (if button operations are not disabled).

Property	Value
Configuration ID	config_3_1
Data Type	INTEGER		Default Value	0
Options	Switch off (default) (0)
	Ignore (1)
	Switch on (2)
	Switch on if load is off, else switch off (3)

5: Restore switch state after power cycle.

Defines if the switch should restore switch state.

Overview

Defines if the switch should restore switch state to the last state prior to device power off (power cycle).

Property	Value
Configuration ID	config_5_1
Data Type	INTEGER		Default Value	1
Options	No, turn off (0)
	Yes, default (1)

20: Specify the consumption of the load in watts

Maximum load 3500 Watts

Overview

Specify the consumption of the load in watts, for the calculation of power consumption:

• 0 -> Disabled
• 1 - 3500 -> Watts

Property	Value
Configuration ID	config_20_2
Data Type	INTEGER
Range	0 to 3500
Default Value	0

21: LED Off color

Color for Off state.

Property	Value
Configuration ID	config_21_1
Data Type	INTEGER		Default Value	0
Options	Off (0)
	Red (1)
	Green (2)
	Blue (3)
	Yellow (4)

22: LED On color.

Color for On state.

Property	Value
Configuration ID	config_22_1
Data Type	INTEGER		Default Value	3
Options	Off (0)
	Red (1)
	Green (2)
	Blue (3)
	Yellow (4)

1: Send Reports on switch state change.

Property	Value
Configuration ID	group_1
Data Type	TEXT
Range	to

2: Controlled by buttons

Property	Value
Configuration ID	group_2
Data Type	TEXT
Range	to

---

Did you spot an error in the above definition or want to improve the content? You can edit the database here.