The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

ZXT-120 AC IR Remote

This describes the Z-Wave device ZXT-120, manufactured by Remotec with the thing type UID of remotec_zxt120_00_000.

The ZXT-120 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the ZXT-120 -:

Channel Channel Id Category Item Type
Sensor (temperature) sensor_temperature Temperature Number
Thermostat mode thermostat_mode Temperature Number
Setpoint (cooling) thermostat_setpoint Temperature Number
Setpoint (heating) thermostat_setpoint Temperature Number
Thermostat fan mode thermostat_fanmode    
Battery Level battery-level Battery Number

Sensor (temperature)

Indicates the current temperature.

The sensor_temperature channel supports the Number item and is in the Temperature category. This is a read only channel so will only be updated following state changes from the device.

Thermostat mode

Sets the thermostat.

The thermostat_mode channel supports the Number item and is in the Temperature category. The following state translation is provided for this channel to the Number item type -:

Value Label
0 Off
1 Heat
2 Cool
3 Auto
4 Aux Heat
5 Resume
6 Fan Only
7 Furnace
8 Dry Air
9 Moist Air
10 Auto Changeover
11 Heat Economy
12 Cool Economy
13 Away
15 Full Power
31 Manufacturer Specific

Setpoint (cooling)

Sets the thermostate setpoint.

The thermostat_setpoint channel supports the Number item and is in the Temperature category.

Setpoint (heating)

Sets the thermostate setpoint.

The thermostat_setpoint channel supports the Number item and is in the Temperature category.

Thermostat fan mode

Channel type information on this channel is not found.

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The battery-level channel supports the Number item and is in the Battery category.

Device Configuration

The following table provides a summary of the 8 configuration parameters available in the ZXT-120. Detailed information on each parameter can be found in the sections below.

Param Name Description
25 Indicate a location for IR code learning and start learning  
26 Learning status register (Read Only)  
27 IR code number for built-in code library  
28 External IR Emitter power level  
32 Surround IR control  
33 AC function Swing control  
35 Learn location status. Bitmask. (Read Only)  
37 Sensor temperature compensation  
  Switch All Mode Set the mode for the switch when receiving SWITCH ALL commands

Parameter 25: Indicate a location for IR code learning and start learning

Values in the range 0 to 22 may be set.

The manufacturer defined default value is 1.

This parameter has the configuration ID config_25_1 and is of type INTEGER.

Parameter 26: Learning status register (Read Only)

Values in the range 0 to 4 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_26_1 and is of type INTEGER. This is a read only parameter.

Parameter 27: IR code number for built-in code library

Values in the range 0 to 65535 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_27_2 and is of type INTEGER.

Parameter 28: External IR Emitter power level

The following option values may be configured -:

Value Description
0 Normal power mode
255 High power mode

The manufacturer defined default value is 255 (High power mode).

This parameter has the configuration ID config_28_1 and is of type INTEGER.

Parameter 32: Surround IR control

The following option values may be configured -:

Value Description
-1 Enable Surround IR Emitters
0 Disable Surround IR Emitters

The manufacturer defined default value is -1 (Enable Surround IR Emitters).

This parameter has the configuration ID config_32_1 and is of type INTEGER.

Parameter 33: AC function Swing control

The following option values may be configured -:

Value Description
0 Swing Off
1 Swing Auto

The manufacturer defined default value is 1 (Swing Auto).

This parameter has the configuration ID config_33_1 and is of type INTEGER.

Parameter 35: Learn location status. Bitmask. (Read Only)

Values in the range 0 to 65535 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_35_4 and is of type INTEGER. This is a read only parameter.

Parameter 37: Sensor temperature compensation

Values in the range -5 to 5 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_37_1 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -: | Value | Description | |——–|————-| | 0 | Exclude from All On and All Off groups | | 1 | Include in All On group | | 2 | Include in All Off group | | 255 | Include in All On and All Off groups |

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_SWITCH_ALL_V1  
COMMAND_CLASS_SENSOR_MULTILEVEL_V1  
COMMAND_CLASS_THERMOSTAT_MODE_V2  
COMMAND_CLASS_THERMOSTAT_SETPOINT_V2  
COMMAND_CLASS_THERMOSTAT_FAN_MODE_V2  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_BATTERY_V1  
COMMAND_CLASS_VERSION_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.