BE469 Touchscreen Deadbolt

This describes the Z-Wave device BE469, manufactured by Allegion with the thing type UID of schlage_be469_00_000.

Touchscreen Deadbolt

Channels

The following table summarises the channels available for the BE469 Touchscreen Deadbolt.

Channel Channel Id Channel Type UID Category Item Type
Door Lock lock_door lock_door Door Switch
Alarm alarm_general alarm_general Door Switch
Alarm (raw) alarm_raw alarm_raw   String
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the BE469 Touchscreen Deadbolt. Detailed information on each parameter can be found below.

Parameter Description
3: Beeper  
4: Vacation Mode  
5: Lock & Leave  
6: User Slot Status  
7: Lock Specific Alarm Mode BE469 Only
8: Lock Specific Alarm Alert Sensitivity  
9: Lock Specific Alarm Tamper Sensitivity  
10: Lock Specific Alarm Kick Sensitivity BE469 Only
11: Lock Specific Alarm Disable—Local Controls  
12: Electronic Transition Count  
13: Mechanical Transition Count  
14: Electronic Failed Count  
15: Auto Lock  
16: User Code PIN Length User Code PIN length, a value between 4 and 8 (default 4)
18: Get Bootloader Version  
1: Alarm Reports  

3: Beeper

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 255
Options Disable Beeper (0)      
  Enable Beeper (255)      

4: Vacation Mode

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options Disable Vacation Mode (0)      
  Enable Vacation Mode (255)      

5: Lock & Leave

Property Value      
Configuration ID config_5_1      
Data Type INTEGER   Default Value 0
Options Disable Lock & Leave (0)      
  Enable Lock & Leave (255)      

6: User Slot Status

Overview

Byte 1 (msb): Bit 7: User 8 Status Bit 6: User 7 Status Bit 5: User 6 Status Bit 4: User 5 Status Bit 3: User 4 Status Bit 2: User 3 Status Bit 1: User 2 Status Bit 0: User 1 Status Byte 2 : Bit 7: User 16 Status Bit 6: User 15 Status Bit 5: User 14 Status Bit 4: User 13 Status Bit 3: User 12 Status Bit 2: User 11 Status Bit 1: User 10 Status Bit 0: User 9 Status Byte 3 : Bit 7: User 24 Status Bit 6: User 23 Status Bit 5: User 22 Status Bit 4: User 21 Status Bit 3: User 20 Status Bit 2: User 19 Status Bit 1: User 18 Status Bit 0: User 17 Status Byte 4 (lsb): Bit 7: reserved Bit 6: reserved Bit 5: User 30 Status Bit 4: User 29 Status Bit 3: User 28 Status Bit 2: User 27 Status Bit 1: User 26 Status Bit 0: User 25 Status

Property Value
Configuration ID config_6_4
Data Type INTEGER
Range 0 to 255
Default Value 0

7: Lock Specific Alarm Mode

BE469 Only

Property Value      
Configuration ID config_7_1      
Data Type INTEGER   Default Value 0
Options Alarm Off (0)      
  Alert (1)      
  Tamper (2)      
  Forced Entry (3)      

8: Lock Specific Alarm Alert Sensitivity

Property Value      
Configuration ID config_8_1      
Data Type INTEGER   Default Value 0
Options Not Supported (0)      
  Most Sensitive (1)      
  More Sensitive (2)      
  Medium Sensitivity (3)      
  Less Sensitive (4)      
  Least Sensitive (5)      

9: Lock Specific Alarm Tamper Sensitivity

Property Value      
Configuration ID config_9_1      
Data Type INTEGER   Default Value 0
Options Not Supported (0)      
  Most Sensitive (1)      
  More Sensitive (2)      
  Medium Sensitivity (3)      
  Less Sensitive (4)      
  Least Sensitive (5)      

10: Lock Specific Alarm Kick Sensitivity

BE469 Only

Property Value      
Configuration ID config_10_1      
Data Type INTEGER   Default Value 0
Options Not Supported (0)      
  Most Sensitive (1)      
  More Sensitive (2)      
  Medium Sensitivity (3)      
  Less Sensitive (4)      
  Least Sensitive (5)      

11: Lock Specific Alarm Disable—Local Controls

Property Value      
Configuration ID config_11_1      
Data Type INTEGER   Default Value 0
Options Disable Local Control (0)      
  Enable Local Control (255)      

12: Electronic Transition Count

Property Value
Configuration ID config_12_4
Data Type INTEGER
Range 0 to 2147483647
Default Value 0

13: Mechanical Transition Count

Property Value
Configuration ID config_13_4
Data Type INTEGER
Range 0 to 2147483647
Default Value 0

14: Electronic Failed Count

Property Value
Configuration ID config_14_4
Data Type INTEGER
Range 0 to 2147483647
Default Value 0

15: Auto Lock

Property Value      
Configuration ID config_15_1      
Data Type INTEGER   Default Value 0
Options Disable Auto Lock (0)      
  Enable Auto Lock (255)      

16: User Code PIN Length

User Code PIN length, a value between 4 and 8 (default 4)

Property Value      
Configuration ID config_16_1      
Data Type INTEGER   Default Value 4
Options Four Digits (4)      
  Five Digits (5)      
  Six Digits (6)      
  Seven Digits (7)      
  Eight Digits (8)      

18: Get Bootloader Version

Property Value
Configuration ID config_18_1
Data Type INTEGER
Range 0 to 255
Default Value 0

1: Alarm Reports

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.