11-01-011 Strips-MaZw

This describes the Z-Wave device 11-01-011, manufactured by Sensative AB with the thing type UID of sensative_1101011_00_000.

Strips-MaZw

Inclusion Information

  • Set your controller in inclusion mode (see your controller’s manual).
  • Follow the instruction for Wake up.
  • A long LED blink indicates that the inclusion was successful.

Exclusion Information

  • Set your controller in exclusion mode (see your controller’s manual).
  • Follow the instruction for Wake up.
  • A long LED blink indicates that the exclusion was successful.

Wakeup Information

Wake up Strips manually for Z-Wave communication.

  • Place the round magnet at the rounded edge.
  • When the LED blinks, move the magnet away.
  • Repeat 3 times in total within 10 seconds.

It may be necessary to repeat this process several times to make changes take affect.

Note that wakeup period can only be set to a minimum period of 30 minutes.

Channels

The following table summarises the channels available for the 11-01-011 Strips-MaZw.

Channel Channel Id Channel Type UID Category Item Type
Door Sensor sensor_door sensor_door Door Contact
Tamper Alarm alarm_tamper alarm_tamper   Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the 11-01-011 Strips-MaZw. Detailed information on each parameter can be found below.

Parameter Description
1: Notification type Define the notification type.
2: LED indication Specify if LED should indicate special event.
1: Lifeline  

1: Notification type

Define the notification type.

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 1
Options Binary Sensor report (0)      
  Notification report (1)      
  Basic report (2)      

2: LED indication

Specify if LED should indicate special event.

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 1
Options Off (0)      
  On (1)      

1: Lifeline

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.