K8 Z-Wave Battery Wall Controller

This describes the Z-Wave device K8, manufactured by Sigma Designs (Former Zensys) with the thing type UID of sigma_zwck8_00_000.

Z-Wave Battery Wall Controller

Overview

Note that this device incorrectly reports the manufacturer ID. This may be due to the device being uncertified and therefore this device may be removed from the database at some stage.

Channels

The following table summarises the channels available for the K8 Z-Wave Battery Wall Controller.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the K8 Z-Wave Battery Wall Controller. Detailed information on each parameter can be found below.

Parameter Description
1: Lifeline  
2: Button pair 1  
3: Button pair 2  
4: Button pair 3  
5: Button pair 4  

1: Lifeline

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Button pair 1

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: Button pair 2

Property Value
Configuration ID group_3
Data Type TEXT
Range to

4: Button pair 3

Property Value
Configuration ID group_4
Data Type TEXT
Range to

5: Button pair 4

Property Value
Configuration ID group_5
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.