The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

ZV9001T4-DIM 4 group single colour touch panel secondary controller

This describes the Z-Wave device ZV9001T4-DIM, manufactured by Sunricher with the thing type UID of sunricher_zv9001t4dim_00_000.

The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

ZV9001T4-DIM product image

The ZV9001T4-DIM supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

SR-ZV9001T4-DIM-EU is a touch control z-wave secondary controller (z wave dimmer switch) with z-wave Plus enabled for single color LED lighting. As a z-wave secondary controller, it is a z wave dimmer switch which can be added to z-wave network and removed from z-wave network by z-wave primary (master) controllers or gateway and control z-wave devices that are added to the network. It supports 5 groups for associations, a lifeline group association to primary (master) controller and 4 groups association to devices, the group association to devices supports maximum 12 Z-wave devices per group. It is a universal z-wave slave which can be compatible with universal z-wave primary controller or gateway. The wireless controller is compatible with single color z wave device SR-ZV9101FA-DIM and different frequencies are available for different countries or areas. The signal transmit distance can be up to 30m. The controller supports group and scene storage and recall functions. It is easy to install on the wall and available in standard EU size.

Key Features

  • Single color touch Z-wave secondary controller
  • Source-routed Mesh Network Architecture
  • Each device works as a node
  • All Nodes Are Transceivers
  • Each Z-wave Network Allows Up to 243 Devices
  • Actively route around and circumvent obstacles or radio dead spots
  • Wireless Synchronization to Drastically Increase Control Distance
  • Devices can communicate to one another by using intermediate nodes
  • Added or removed by primary controllers or gateway
  • Supports 1 lifeline group association to master controller
  • Supports 4 groups association to z-wave devices, maximum 12 devices per group
  • Compatible with universal z-wave primary controller or gateway
  • Supports group, scene storage and recall functions

Inclusion Information

Set z-wave master (primary) controller into network inclusion mode (please refer to their manual to learn how) Click the “Inclusion/Exclusion” key on the back of the slave controller (or press and hold down the switch key ) -> LED indicator on the salve controller turns on and flashes 6 times quickly to indicate successful adding -> there shall be an indication on master controller or z-wave gateway

Exclusion Information

When the slave controller has already been added to z-wave network, set the z-wave master controller or z-wave gateway into network exclusion mode (please refer to their user manual to learn how)

Click the “Inclusion/Exclusion” key on the back of the slave controller (or press and hold down the switch key )

-> LED indicator on the slave controller turns on and shows 3 short blinks and 1 long blink to indicate successful removing

-> there shall be an indication on the master controller

Channels

The following table summarises the channels available for the ZV9001T4-DIM -:

Channel Channel Id Category Item Type
Dimmer group 1 switch_dimmer DimmableLight Dimmer
Scene activation number scene_number   Number
Scene Number scene_number   Number
Dimmer Group 2 switch_dimmer1 DimmableLight Dimmer
Dimmer group 3 switch_dimmer2 DimmableLight Dimmer
Dimmer Group 4 switch_dimmer3 DimmableLight Dimmer

Dimmer group 1

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.

Scene activation number

Triggers when a scene button is pressed.

The scene_number channel supports the Number item.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel supports the Number item.

Dimmer Group 2

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer1 channel supports the Dimmer item and is in the DimmableLight category.

Dimmer group 3

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer2 channel supports the Dimmer item and is in the DimmableLight category.

Dimmer Group 4

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer3 channel supports the Dimmer item and is in the DimmableLight category.

Device Configuration

The following table provides a summary of the 2 configuration parameters available in the ZV9001T4-DIM. Detailed information on each parameter can be found in the sections below.

Param Name Description
3 Scene_type Scene type
4 Scene_send_to_where Scene send to where

Parameter 3: Scene_type

Scene type Parameter 3 can be configured via “COMMAND_CLASS_CONFIGURATION” to decide which scene command to use “CENTRAL SCENE” or “SCENE ACTIVATION”, factory default is “CENTRAL SCENE”. Values in the range 0 to 1 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Scene_send_to_where

Scene send to where Parameter 4 can be configured via “COMMAND_CLASS_CONFIGURATION” to decide which object shall the remote send scene packet to, the gateway or the association group. Factory default is the association group. By factory default this remote uses “CENTRAL SCENE” to send packet to the association group devices, this method requires that the controlled devices support “CENTRAL SCENE” Values in the range 0 to 1 may be set.

The manufacturer defined default value is 1.

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The ZV9001T4-DIM supports 5 association groups.

Group 1: Lifeline

This group supports 1 nodes.

Group 2: Group 2

Launch 1 This group supports 12 nodes.

Group 3: Group 3

Launch 2 This group supports 12 nodes.

Group 4: Group 4

Launch 3 This group supports 12 nodes.

Group 5: Group 5

Launch 4 This group supports 12 nodes.

Technical Information

Endpoints

Endpoint 0

| Command Class | Comment | |—————|———| | COMMAND_CLASS_NO_OPERATION_V1| | | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_MULTILEVEL_V4| Linked to BASIC| | COMMAND_CLASS_SCENE_ACTIVATION_V0| | | COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1| | | COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1| | | COMMAND_CLASS_CENTRAL_SCENE_V3| | | COMMAND_CLASS_ZWAVEPLUS_INFO_V1| | | COMMAND_CLASS_CONFIGURATION_V1| | | COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1| | | COMMAND_CLASS_POWERLEVEL_V1| | | COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1| | | COMMAND_CLASS_ASSOCIATION_V2| | | COMMAND_CLASS_VERSION_V2| | | COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3| | | COMMAND_CLASS_SECURITY_V0| |

Endpoint 1

| Command Class | Comment | |—————|———| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_MULTILEVEL_V4| Linked to BASIC|

Endpoint 2

| Command Class | Comment | |—————|———| | COMMAND_CLASS_BASIC_V1| | | COMMAND_CLASS_SWITCH_MULTILEVEL_V4| Linked to BASIC|

Endpoint 3

Command Class Comment
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_SWITCH_MULTILEVEL_V4 Linked to BASIC

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.