ZV9102FA-CCT Z-wave CCT LED controller

This describes the Z-Wave device ZV9102FA-CCT, manufactured by Sunricher with the thing type UID of sunricher_zv9102facct_00_000.

Z-wave CCT LED controller


The SR-ZV9102FA-CCT is a dual color zwave lighting device and z wave slave that adopts z-wave RF Plus and z-wave mesh network technology with 4 channel, 5A per channel output for dual color LED lights. As a z-wave slave, the device can be added to z-wave network or removed from z-wave network by z-wave primary (master) controllers or gateway. The z wave devices are transceivers that enable to receive and transmit RF signal from the z wave remote while both of them are added to the network. The transceiver is a universal z wave slave which is compatible with universal z wave primary (master) controllers/gateway.


The following table summarises the channels available for the ZV9102FA-CCT Z-wave CCT LED controller.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number scene_number   Number
Color Control color_color color_color   Color
Color Temperature color_temperature color_temperature ColorLight Dimmer
Alarm (system) alarm_system alarm_system   Switch


Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the ZV9102FA-CCT Z-wave CCT LED controller. Detailed information on each parameter can be found below.

Parameter Description
1: Lifeline  

1: Lifeline


Single Cast DEVICE_RESET_LOCALLY_NOTIFICATION (sent when factory reset the device)

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.