TZDW-100 Door/window sensor

This describes the Z-Wave device TZDW-100, manufactured by Telldus Technologies AB with the thing type UID of telldus_tzdw100_00_000.

Door/window sensor

Channels

The following table summarises the channels available for the TZDW-100 Door/window sensor.

Channel	Channel Id	Channel Type UID	Category	Item Type
Door Sensor	sensor_door	sensor_door	Door	Contact
Alarm	alarm_general	alarm_general	Door	Switch
	battery-level	system.battery-level

Device Configuration

The following table provides a summary of the configuration parameters available in the TZDW-100 Door/window sensor. Detailed information on each parameter can be found below.

Parameter	Description
1:	Select what type of command to be sent to nodes in association group 2
2:	Select what value that should be sent to association group 2
3:	Type of commands to association group 2
4:	Select what type of command to be sent to nodes in association group 3
5:	Select what value that should be sent to association group 3
6:	Type of commands to association group 3
7:	LED-Indicator
8:	Select the type of command to be sent in the Lifeline
1: Lifeline	Lifeline - Sensor status
2: Status	Sensor status
3: Status	Sensor status

1:

Select what type of command to be sent to nodes in association group 2

Property	Value
Configuration ID	config_1_1
Data Type	INTEGER		Default Value	0
Options	Basic (0)
	Switch Binary (1)
	Switch All (2)
	Switch Multilevel (3)

2:

Select what value that should be sent to association group 2

Property	Value
Configuration ID	config_2_1
Data Type	INTEGER
Range	0 to 63		Default Value	255
Options	Last value (255)

3:

Type of commands to association group 2

Property	Value
Configuration ID	config_3_1
Data Type	INTEGER		Default Value	0
Options	Normal (0)
	Inverted (1)

4:

Select what type of command to be sent to nodes in association group 3

Property	Value
Configuration ID	config_4_1
Data Type	INTEGER		Default Value	0
Options	Basic (0)
	Switch Binary (1)
	Switch All (2)
	Switch Multilevel (3)

5:

Select what value that should be sent to association group 3

Property	Value
Configuration ID	config_5_1
Data Type	INTEGER
Range	0 to 63		Default Value	255
Options	Last value (255)

6:

Type of commands to association group 3

Property	Value
Configuration ID	config_6_1
Data Type	INTEGER		Default Value	0
Options	Normal (0)
	Inverted (1)

7:

LED-Indicator

Property	Value
Configuration ID	config_7_1
Data Type	INTEGER		Default Value	1
Options	Off (0)
	On (1)

8:

Select the type of command to be sent in the Lifeline

Property	Value
Configuration ID	config_8_1
Data Type	INTEGER		Default Value	0
Options	Notification (0)
	Sensor binary (1)

1: Lifeline

Lifeline - Sensor status

Property	Value
Configuration ID	group_1
Data Type	TEXT
Range	to

2: Status

Sensor status

Property	Value
Configuration ID	group_2
Data Type	TEXT
Range	to

3: Status

Sensor status

Property	Value
Configuration ID	group_3
Data Type	TEXT
Range	to

---

Did you spot an error in the above definition or want to improve the content? You can edit the database here.