TZ65D Dual Paddle Wall Dimmer

This describes the Z-Wave device TZ65D, manufactured by TKB Home with the thing type UID of tkb_tz65d_00_000.

Dual Paddle Wall Dimmer

Channels

The following table summarises the channels available for the TZ65D Dual Paddle Wall Dimmer.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the TZ65D Dual Paddle Wall Dimmer. Detailed information on each parameter can be found below.

Parameter Description
1: Ignore start level Ignore start level when transmitting a dim command to the dimmer
2: Suspend Group 4 Setting this parameter will disable transmitting commands to devices in association group …
3: Blue LED light Behavior Defines the behavior of the blue LED. Default is Night Light mode where LED is on when swi…
4: Invert Switch To change the top of the switch to off and the botton to on
14: Enable Shade Control Group 2 Enable the control of shade devices in association group 2 when this option is activated
15: Enable Shade Control Group 3 Enable the control of shade devices in association group 3 when this option is activated
19: Blue LED light behavior on transmission Defines the behavior of the blue LED when transmission of data
20: Poll Group 2 Interval (minutes) Polling Interval in minutes (default 2)
22: Poll Group 2 Defines if the device will poll association Group 2 at the interval defined in parameter 2…
1: Group 1  
2: Group 2  
3: Group 3  
4: Group 4  

1: Ignore start level

Ignore start level when transmitting a dim command to the dimmer

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 1
Options Ignore (0)      
  Don't ignore (1)      

2: Suspend Group 4

Setting this parameter will disable transmitting commands to devices in association group 4

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 0
Options Transmit to group 4 (0)      
  Disable transmitting to group 4 (1)      

3: Blue LED light Behavior

Defines the behavior of the blue LED. Default is Night Light mode where LED is on when switch is off

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 0
Options Led on when switch on (0)      
  Night light (1)      

4: Invert Switch

To change the top of the switch to off and the botton to on

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options ON on top (0)      
  OFF on top (1)      

14: Enable Shade Control Group 2

Enable the control of shade devices in association group 2 when this option is activated

Property Value      
Configuration ID config_14_1      
Data Type INTEGER   Default Value 0
Options Inactive (0)      
  Shade Control (1)      

15: Enable Shade Control Group 3

Enable the control of shade devices in association group 3 when this option is activated

Property Value      
Configuration ID config_15_1      
Data Type INTEGER   Default Value 0
Options Inactive (0)      
  Shade Control (1)      

19: Blue LED light behavior on transmission

Defines the behavior of the blue LED when transmission of data

Property Value      
Configuration ID config_19_1      
Data Type INTEGER   Default Value 2
Options LED does not blinks on activity (0)      
  LED blinks on activity all the time (1)      
  LED blinks on activity 1 second (2)      

20: Poll Group 2 Interval (minutes)

Polling Interval in minutes (default 2)

Property Value
Configuration ID config_20_1
Data Type INTEGER
Range 1 to 255
Default Value 2

22: Poll Group 2

Defines if the device will poll association Group 2 at the interval defined in parameter 20

Property Value      
Configuration ID config_22_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Enabled (1)      

1: Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Group 2

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: Group 3

Property Value
Configuration ID group_3
Data Type TEXT
Range to

4: Group 4

Property Value
Configuration ID group_4
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.