TZ66D Dual Paddle Wall Switch

This describes the Z-Wave device TZ66D, manufactured by TKB Home with the thing type UID of tkb_tz66d_00_000.

Dual Paddle Wall Switch

Channels

The following table summarises the channels available for the TZ66D Dual Paddle Wall Switch.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the TZ66D Dual Paddle Wall Switch. Detailed information on each parameter can be found below.

Parameter Description
1: Ignore start level Ignore start level when transmitting a dim command to the switch
2: Suspend Group 4 Disable transmitting commands to devices in association group 4
3: Blue LED light Behavior Blue LED light Behavior. Default is Night Light (led on when switch off)
4: Invert Switch To change the top of the switch to off and the botton to on
14: Enable Shade Control Group 2 Enable the control of shade devices in association group 2 when this option is activated
15: Enable Shade Control Group 3 Enable the control of shade devices in association group 3 when this option is activated
19: Blue LED light behavior on transmission Defines the behavior of the blue LED when transmission of data
20: Poll Group 2 Interval (minutes) Polling Interval in minutes (default 2)
22: Poll Group 2 Defines if the device will poll association Group 2 at the interval defined in parameter 2…
1: Group 1  
2: Group 2  
3: Group 3  
4: Group 4  

1: Ignore start level

Ignore start level when transmitting a dim command to the switch

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 1
Options Ignore (0)      
  Don't ignore (1)      

2: Suspend Group 4

Disable transmitting commands to devices in association group 4

Overview

Setting this parameter will disable transmitting commands to devices in association group 4

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 0
Options Transmit to group 4 (0)      
  Disable transmitting to group 4 (1)      

3: Blue LED light Behavior

Blue LED light Behavior. Default is Night Light (led on when switch off)

Overview

Defines the behavior of the blue LED. Default is Night Light mode where LED is on when switch is off

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 0
Options Led on when switch on (0)      
  Night light (1)      

4: Invert Switch

To change the top of the switch to off and the botton to on

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options ON on top (0)      
  OFF on top (1)      

14: Enable Shade Control Group 2

Enable the control of shade devices in association group 2 when this option is activated

Property Value      
Configuration ID config_14_1      
Data Type INTEGER   Default Value 0
Options Inactive (0)      
  Shade Control (1)      

15: Enable Shade Control Group 3

Enable the control of shade devices in association group 3 when this option is activated

Property Value      
Configuration ID config_15_1      
Data Type INTEGER   Default Value 0
Options Inactive (0)      
  Shade Control (1)      

19: Blue LED light behavior on transmission

Defines the behavior of the blue LED when transmission of data

Property Value      
Configuration ID config_19_1      
Data Type INTEGER   Default Value 2
Options LED does not blinks on activity (0)      
  LED blinks on activity all the time (1)      
  LED blinks on activity 1 second (2)      

20: Poll Group 2 Interval (minutes)

Polling Interval in minutes (default 2)

Property Value
Configuration ID config_20_1
Data Type INTEGER
Range 1 to 255
Default Value 2

22: Poll Group 2

Defines if the device will poll association Group 2 at the interval defined in parameter 20

Property Value      
Configuration ID config_22_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Enabled (1)      

1: Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Group 2

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: Group 3

Property Value
Configuration ID group_3
Data Type TEXT
Range to

4: Group 4

Property Value
Configuration ID group_4
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.