Vitrum III EU Dimmer

This describes the Z-Wave device Vitrum III EU Dimmer, manufactured by VDA with the thing type UID of vda_dimmer3_00_000.

Overview

When the device is in the stand-alone mode and is not included in a Z-Wave network the illuminated ring around the touch keys will light red for a moment when passing from one mode to another.

Inclusion Information

With the controller in the inclusion mode, press any of the touch keys on the device.

Exclusion Information

Press and hold the leftmost touch key for at least 8 seconds. The device will flash red three times and sound an acoustic signal to indicate that the original factory setting has been restored.

Channels

The following table summarises the channels available for the Vitrum III EU Dimmer.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Dimmer 1 switch_dimmer1 switch_dimmer DimmableLight Dimmer
Dimmer 2 switch_dimmer2 switch_dimmer DimmableLight Dimmer
Dimmer 3 switch_dimmer3 switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 1

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 2

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 3

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the Vitrum III EU Dimmer. Detailed information on each parameter can be found below.

Parameter Description
1: Switch channel 1  
2: Dimmer Channel 2  
3: Dimmer Channel 3  

1: Switch channel 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Dimmer Channel 2

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: Dimmer Channel 3

Property Value
Configuration ID group_3
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.