Vitrum Satellite VI Vitrum touch switch satellite 6 buttons

This describes the Z-Wave device Vitrum Satellite VI, manufactured by VDA with the thing type UID of vda_satellitevi_00_000.

Vitrum touch switch satellite 6 buttons

Overview

When the device is in the stand-alone mode and is not included in a Z-Wave network the illuminated ring around the touch keys will light red for a moment when passing from one mode to another.

Each button can be configured in 4 different modes. Press the 2 service buttons (left and right each) for at least 8 seconds. Buttons will start to flash and the color of the flashing ring will indicate the channel setting:

- Yellow: for association with On-Off Modules, toggle-button function (BASIC)

- Red: for association with On-Off Modules, push-button function (BASIC)

- Magenta: for association with Roller Blinds, 2 buttons will start flashing together for up and down movement (SWITCH_MULTILEVEL)

- Green: for association with Dimmer Modules (SWITCH_MULTILEVEL)

After mode selection, please proceed with inclusion process.

Inclusion Information

With the controller in the inclusion mode, press any of the touch keys on the device. Vitrum indicates that it has been included to the network by flashing the yellow LEDs three times and switching on all the lights connected to the unit.

Exclusion Information

Press and hold the leftmost touch key for at least 8 seconds. The device will flash red three times and sound an acoustic signal to indicate that the original factory setting has been restored.

Channels

The following table summarises the channels available for the Vitrum Satellite VI Vitrum touch switch satellite 6 buttons.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Dimmer 1 switch_dimmer1 switch_dimmer DimmableLight Dimmer
Dimmer 2 switch_dimmer2 switch_dimmer DimmableLight Dimmer
Dimmer 3 switch_dimmer3 switch_dimmer DimmableLight Dimmer
Dimmer 4 switch_dimmer4 switch_dimmer DimmableLight Dimmer
Dimmer 5 switch_dimmer5 switch_dimmer DimmableLight Dimmer
Dimmer 6 switch_dimmer6 switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 1

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 2

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 3

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 4

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 5

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Dimmer 6

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the Vitrum Satellite VI Vitrum touch switch satellite 6 buttons. Detailed information on each parameter can be found below.

Parameter Description
1: Button channel 1  
2: Button channel 2  
3: Button channel 3  
4: Button channel 4  
5: Button channel 5  
6: Button channel 6  

1: Button channel 1

Overview

Control up to 5 devices with this button. The kind of device controlled depends on the Button configuration.

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Button channel 2

Overview

Control up to 5 devices with this button. The kind of device controlled depends on the Button configuration.

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: Button channel 3

Overview

Control up to 5 devices with this button. The kind of device controlled depends on the Button configuration.

Property Value
Configuration ID group_3
Data Type TEXT
Range to

4: Button channel 4

Overview

Control up to 5 devices with this button. The kind of device controlled depends on the Button configuration.

Property Value
Configuration ID group_4
Data Type TEXT
Range to

5: Button channel 5

Overview

Control up to 5 devices with this button. The kind of device controlled depends on the Button configuration.

Property Value
Configuration ID group_5
Data Type TEXT
Range to

6: Button channel 6

Overview

Control up to 5 devices with this button. The kind of device controlled depends on the Button configuration.

Property Value
Configuration ID group_6
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.