ZM1702 Door Lock with Handle

This describes the Z-Wave device ZM1702, manufactured by Vision Security with the thing type UID of vision_zm1702_00_000.

Door Lock with Handle

Overview

The ZM1702 is a Z-Wave controllable, single dead bolt lock. The mechanics can be adopted to right or left opening doors. The door lock can be applied for doors from a thickness of 38 mm and up. The door can be locked and unlocked using the inner side turn piece and/or the key pad. The wireless control allows to lock/unlock the lock, set/unset up to 15 different key codes (4 - 8 key long) and to limit the validity of certain key code.

Inclusion Information

Press Keypads ‘C’, ‘8’, ‘8’, ‘8’ and manually turn the door lock from inside to be included.

Exclusion Information

Press Keypads ‘C’, ‘8’, ‘8’, ‘8’ and manually turn the door lock from inside to be excluded.

Channels

The following table summarises the channels available for the ZM1702 Door Lock with Handle.

Channel Channel Id Channel Type UID Category Item Type
Door Lock lock_door lock_door Door Switch
  battery-level system.battery-level    
Entry Alarm alarm_entry alarm_entry Door Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the ZM1702 Door Lock with Handle. Detailed information on each parameter can be found below.

Parameter Description
1: Report Target for Door Lock Operation Report commands

1: Report

Target for Door Lock Operation Report commands

Overview

Support one group (5 nodes). ZM1702 will report back every time lock and unlock status. 

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.