ZSE40 Zooz 4-in-one motion/temperature/humidity/luminance sensor

This describes the Z-Wave device ZSE40, manufactured by Vision Security with the thing type UID of vision_zse40_00_000.

Zooz 4-in-one motion/temperature/humidity/luminance sensor

Channels

The following table summarises the channels available for the ZSE40 Zooz 4-in-one motion/temperature/humidity/luminance sensor.

Channel Channel Id Channel Type UID Category Item Type
Sensor (motion) sensor_binary sensor_binary Door Switch
Sensor (luminance) sensor_luminance sensor_luminance Temperature Number
Sensor (relative humidity) sensor_relhumidity sensor_relhumidity Humidity Number
Sensor (temperature) sensor_temperature sensor_temperature Temperature Number
Alarm (burglar) alarm_burglar alarm_burglar Door Switch
  battery-level system.battery-level    

Sensor (temperature)

Scale

Select the scale for temperature readings

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Device Configuration

The following table provides a summary of the configuration parameters available in the ZSE40 Zooz 4-in-one motion/temperature/humidity/luminance sensor. Detailed information on each parameter can be found below.

Parameter Description
1: Temperature Scale Set the temperature scale
2: Temperature offset  
3: Humidity Configure Relative Humidity
4: Light Sensor Configure Light Sensor
5: Trigger Interval Set the trigger interval for motion sensor re-activation.
6: Motion Sensor Sensitivity Adjust sensitivity of the motion sensor.
7: LED indicator mode Select the LED indicator mode
1: Receive updates Receive sensor updates

1: Temperature Scale

Set the temperature scale

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

2: Temperature offset

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 0 to 50
Default Value 1

3: Humidity

Configure Relative Humidity

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 1 to 50
Default Value 10

4: Light Sensor

Configure Light Sensor

Property Value
Configuration ID config_4_1
Data Type INTEGER
Range 1 to 50
Default Value 10

5: Trigger Interval

Set the trigger interval for motion sensor re-activation.

Property Value
Configuration ID config_5_1
Data Type INTEGER
Range 1 to 255
Default Value 180

6: Motion Sensor Sensitivity

Adjust sensitivity of the motion sensor.

Property Value      
Configuration ID config_6_1      
Data Type INTEGER   Default Value 4
Options highest (1)      
  higher (2)      
  high (3)      
  normal (4)      
  low (5)      
  lower (6)      
  lowest (7)      

7: LED indicator mode

Select the LED indicator mode

Property Value      
Configuration ID config_7_1      
Data Type INTEGER   Default Value 3
Options Off (1)      
  Pulsing Temperature, Flashing Motion (2)      
  Flashing Temperature and Motion (3)      

1: Receive updates

Receive sensor updates

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.