ZW4101 Drapery controller (up/stop/down)

This describes the Z-Wave device ZW4101, manufactured by Vision Security with the thing type UID of vision_zw4101_00_000.

Drapery controller (up/stop/down)

Overview

Drapery controller, supports up/stop/down commands.

Devices is OEMed as Monoprice 11993.

Channels

The following table summarises the channels available for the ZW4101 Drapery controller (up/stop/down).

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the ZW4101 Drapery controller (up/stop/down). Detailed information on each parameter can be found below.

Parameter Description
1: Up output time Up output time
2: Stop output time Stop output time
3: Down output time Down output time

1: Up output time

Up output time

Overview

Time to hold the “up” output button closed (shorted) when unit receives an “up” z-wave command.

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 1 to 255
Default Value 1

2: Stop output time

Stop output time

Overview

Time to hold the “stop” output button closed (shorted) when unit receives a “stop” z-wave command.

Note that the unit will automatically execute STOP, UP or STOP, DOWN when receiving an up or down command.

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 1 to 255
Default Value 1

3: Down output time

Down output time

Overview

Time to hold the “down” output button closed (shorted) when unit receives a “down” z-wave command.

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 1 to 255
Default Value 1

Did you spot an error in the above definition or want to improve the content? You can edit the database here.