NZW30T Inovelli In-Wall Switch (On/Off) Scene Enabled

This describes the Z-Wave device NZW30T, manufactured by Willis Electric Co., Ltd. with the thing type UID of willis_nzw30t_00_000.

Inovelli In-Wall Switch (On/Off) Scene Enabled

Overview

Basic On/Off switch that is “Scene Enabled.” Normal usage: short press up or down turns the switch on or off respectively, but longer presses up or down activate scenes on SmartThings. In smart things, “when pushed” relates to pushing the switch up and “when held” relates to pushing the switch down.

Inclusion Information

Device will automatically enter into inclusion mode when power is first provided to the device for 30 seconds (that is, will stay in inclusion mode for 30 seconds). When power is already present, you can return the switch to inclusion mode by pressing up on the switch 6 times in rapid succession (within 2 seconds).

To include your device with the power already on, here’s what you need to do:

  • Put your HUB/Controller into inclusion mode
  • Press the UP button on your switch 6x rapidly (in a second or so)
  • If your device is not included after this, try again, it took a few tries to get it for me.

Exclusion Information

To remove your device, here’s what you need to do:

  • Put your HUB/Controller into exclusion mode
  • Press the UP button on your switch 6x rapidly (in a second or so)
  • Hopefully your device has been removed

Wakeup Information

N/A

Channels

The following table summarises the channels available for the NZW30T Inovelli In-Wall Switch (On/Off) Scene Enabled.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Scene Number scene_number scene_number   Number

Device Configuration

The following table provides a summary of the configuration parameters available in the NZW30T Inovelli In-Wall Switch (On/Off) Scene Enabled. Detailed information on each parameter can be found below.

Parameter Description
4: Invert Change the top of the switch to OFF and the bottom of the switch to ON.
5: Countdown Countdown to shutoff

4: Invert

Change the top of the switch to OFF and the bottom of the switch to ON.

Overview
Invert Default = Top/On, Bottom/Off

-- Parameter = 4, size = 1 byte, value = 00, Up = On, Down = Off

-- Parameter = 4, size = 1 byte, value = 01, Up = Off, Down = On

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options Default (0)      
  Inverted (1)      

5: Countdown

Countdown to shutoff

Overview

Sets switch to have a countdown to shutoff. A value of 0 disables the countdown entirely.

From Manual:

Countdown Default = No Timer

-- Parameter = 5, size = 2 bytes, value = xx xx

-- Value = 00 (Default) = No Timer

-- (0x00—x8000)(range = 0-32768 Seconds)

Property Value
Configuration ID config_5_2
Data Type INTEGER
Range 0 to 32768
Default Value 0

Did you spot an error in the above definition or want to improve the content? You can edit the database here.