ZEN20 Smart Energy Power Strip

This describes the Z-Wave device ZEN20, manufactured by Willis Electric Co., Ltd. with the thing type UID of willis_zen20_00_000.

Smart Energy Power Strip

Inclusion Information

  1. Plug the power strip into a grounded receptacle located within direct range from your Z- Wave gateway controller
  2. Put your Z-Wave controller in inclusion mode
  3. Press and release the CH1 power button on the strip 3 times quickly
  4. A new on / off device should appear on your controller’s device list

Troubleshooting Tips

If you are unable to include the Z-Wave power strip to your controller, please try one of the following:

  • Bring the power strip closer to your Z-Wave controller
  • Press and release the CH1 power button quickly 7-8 times once you put the controller in the inclusion mode to ensure the command has gone through
  • Put your controller in the EXCLUSION mode and press and release the CH1 power button quickly 3 times, then try adding it to your network again

Exclusion Information

  1. Plug the power strip into a grounded receptacle located within direct range from your Z-Wave gateway controller
  2. Put your Z-Wave controller in exclusion mode
  3. Press and release the CH1 power button on the strip 3 times quickly
  4. The device should disappear from your controller’s device list

Please repeat the process following all steps carefully if the first attempt is unsuccessful

Channels

The following table summarises the channels available for the ZEN20 Smart Energy Power Strip.

Channel Channel Id Channel Type UID Category Item Type
Switch 1 switch_binary1 switch_binary Switch Switch
Switch 2 switch_binary2 switch_binary Switch Switch
Switch 3 switch_binary3 switch_binary Switch Switch
Switch 4 switch_binary4 switch_binary Switch Switch
Switch 5 switch_binary5 switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the ZEN20 Smart Energy Power Strip. Detailed information on each parameter can be found below.

| Parameter | Description | |————-|————-|


Did you spot an error in the above definition or want to improve the content? You can edit the database here.