ZW37 Inovelli 2 channel smart plug
This describes the Z-Wave device ZW37, manufactured by Willis Electric Co., Ltd. with the thing type UID of
Inovelli 2 channel smart plug
- Follow the instructions for your Z-Wave certified controller to include the device to the Z-Wave network. 2. Once the controller is ready to include your device, single press and release the toggle (A) 3-5 times within 3 seconds on the device to include it in the network. * Devices with AUTO Inclusion - After setting the HUB controller to Inclusion/Pairing mode, simply plug in the device and the device will automatically begin the inclusion process. 3. Once your controller has confirmed that the device has been included and placed at its desired location, refresh the Z-Wave network to optimize performance. 4. The association group supports two nodes and life line function. Note: Your device may need to be within 10 feet of the controller to be included. If so, include the device to the network within 10 feet of the controller and relocate it to the desired position in your home. Be sure to refresh the network if the device is included in this manner.
- Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. 2. Once the controller is ready to exclude your device, press in and release the toggle (A) 3-5 times within 3 seconds to exclude it from the network.
The following table summarises the channels available for the ZW37 Inovelli 2 channel smart plug.
|Channel||Channel Id||Channel Type UID||Category||Item Type|
The following table provides a summary of the configuration parameters available in the ZW37 Inovelli 2 channel smart plug. Detailed information on each parameter can be found below.
| Parameter | Description | |————-|————-|
Did you spot an error in the above definition or want to improve the content? You can edit the database here.