The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

YRD210 Push Button Deadbolt

This describes the Z-Wave device YRD210, manufactured by ASSA ABLOY with the thing type UID of yale_yrd210_00_000.

The device is in the category of Lock, defining Devices whose primary pupose is locking something.

YRD210 product image

The YRD210 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the YRD210 -:

Channel Channel Id Category Item Type
Alarm alarm_general Door Switch
Alarm Raw alarm_raw   String
Battery Level battery-level Battery Number

Alarm

Indicates if an alarm is triggered.

The alarm_general channel supports the Switch item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value Label
OFF Ok
ON Alarm

Alarm Raw

You can use this channel to monitor alarm notifications in rules and process events such as “keypad unlocked” and “user code added”. Will require JSONPath processing

Provides alarm parameters as json string.

The alarm_raw channel supports the String item. This is a read only channel so will only be updated following state changes from the device.

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The battery-level channel supports the Number item and is in the Battery category.

Device Configuration

The following table provides a summary of the 7 configuration parameters available in the YRD210. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Audio Mode  
2 Auto relock  
3 Relock time Seconds; after successful code entry and unit unlocks, it will automatically re-lock after specified time
4 Wrong Code Entry Limit The number of invalid code entries lock will accept before sending TAMPER Alarm. When number of wrong code entries is exceeded, lock will disable keypad for the time specified by Shutdown Time parameter.
5 Language  
7 Shutdown Time Number of seconds unit will be inoperable after number of wrong code entries is exceeded.
8 Operating Mode  
  Lock Timeout Sets the time after which the door will auto lock

Parameter 1: Audio Mode

The following option values may be configured -:

Value Description
1 Silent
2 Low
3 High

The manufacturer defined default value is 3 (High).

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Auto relock

The following option values may be configured -:

Value Description
0 Off
255 On

The manufacturer defined default value is 255 (On).

This parameter has the configuration ID config_2_1 and is of type INTEGER.

Parameter 3: Relock time

Seconds; after successful code entry and unit unlocks, it will automatically re-lock after specified time

Values in the range 5 to 255 may be set.

The manufacturer defined default value is 30.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Wrong Code Entry Limit

The number of invalid code entries lock will accept before sending TAMPER Alarm. When number of wrong code entries is exceeded, lock will disable keypad for the time specified by Shutdown Time parameter.

Values in the range 1 to 7 may be set.

The manufacturer defined default value is 5.

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 5: Language

The following option values may be configured -:

Value Description
1 English
2 Spanish
3 French

The manufacturer defined default value is 1 (English).

This parameter has the configuration ID config_5_1 and is of type INTEGER.

Parameter 7: Shutdown Time

Number of seconds unit will be inoperable after number of wrong code entries is exceeded.

Values in the range 1 to 255 may be set.

The manufacturer defined default value is 30.

This parameter has the configuration ID config_7_1 and is of type INTEGER.

Parameter 8: Operating Mode

Normal Mode

Vacation Mode - all user codes disabled

Privacy Mode - all user codes disabled and RF Lock/Unlock disabled The following option values may be configured -:

Value Description
0 Normal
1 Vacation
2 Privacy

The manufacturer defined default value is 0 (Normal).

This parameter has the configuration ID config_8_1 and is of type INTEGER.

Lock Timeout

Sets the time after which the door will auto lock.

This parameter has the configuration ID doorlock_timeout and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The YRD210 supports 1 association group.

Group 1: Alarm Reports

This group supports 4 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_DOOR_LOCK_V1  
COMMAND_CLASS_USER_CODE_V1  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_ALARM_V1 Linked to BASIC
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_PROTECTION_V1  
COMMAND_CLASS_LOCK_V1  
COMMAND_CLASS_BATTERY_V1  
COMMAND_CLASS_ASSOCIATION_V1  
COMMAND_CLASS_VERSION_V1  
COMMAND_CLASS_SECURITY_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.