The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

YRD246 Touchscreen deadbolt without keyway

This describes the Z-Wave device YRD246, manufactured by ASSA ABLOY with the thing type UID of yale_yrd246_00_000.

The device is in the category of Lock, defining Devices whose primary pupose is locking something.

YRD246 product image

The YRD246 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the YRD246 -:

Channel Channel Id Category Item Type
Door Lock lock_door Door Switch
Alarm (access) alarm_access Door Switch
Alarm (power) alarm_power Door Switch
Alarm (raw) alarm_raw   String
Battery Level battery-level Battery Number
Clock Time Offset time_offset Temperature Number

Door Lock

Lock and unlock the door.

The lock_door channel supports the Switch item and is in the Door category.

Alarm (access)

Indicates if the access control alarm is triggered.

The alarm_access channel supports the Switch item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value Label
OFF Ok
ON Alarm

Alarm (power)

Indicates if a power alarm is triggered.

The alarm_power channel supports the Switch item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value Label
OFF Ok
ON Alarm

Alarm (raw)

Provides alarm parameters as json string.

The alarm_raw channel supports the String item. This is a read only channel so will only be updated following state changes from the device.

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The battery-level channel supports the Number item and is in the Battery category.

Clock Time Offset

Provides the current time difference for the devices time.

The time_offset channel supports the Number item and is in the Temperature category.

Device Configuration

The following table provides a summary of the 7 configuration parameters available in the YRD246. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Volume Volume of voice and beeps
2 Auto relock Automatic relocking
3 Auto relock time Time for auto relock
4 Incorrect PIN limit Number of incorrect PINs before lockout
6 Radio event reporting  
7 Keypad lockout time Incorrect PINs lockout time
8 Operation Mode Operation Mode
  Lock Timeout Sets the time after which the door will auto lock

Parameter 1: Volume

Volume of voice and beeps

The following option values may be configured -:

Value Description
1 Loud
2 Quiet
3 Silent

The manufacturer defined default value is 1 (Loud).

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Auto relock

Automatic relocking

The following option values may be configured -:

Value Description
0 No auto-relock
255 Auto relock

The manufacturer defined default value is 0 (No auto-relock).

This parameter has the configuration ID config_2_1 and is of type INTEGER.

Parameter 3: Auto relock time

Time for auto relock Number of seconds after the door is unlocked that it will attempt to automatically re-lock itself, if enabled. Values in the range 5 to 255 may be set.

The manufacturer defined default value is 30.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Incorrect PIN limit

Number of incorrect PINs before lockout Number of incorrect PINs that can be attempted before lock goes into temporary keypad lockout. Values in the range 1 to 7 may be set.

The manufacturer defined default value is 5.

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 6: Radio event reporting

This is an advanced parameter and will therefore not show in the user interface without entering advanced mode. The following option values may be configured -:

Value Description
0 Don’t report events?
255 Do report events?

The manufacturer defined default value is 255 (Do report events?).

This parameter has the configuration ID config_6_1 and is of type INTEGER.

Parameter 7: Keypad lockout time

Incorrect PINs lockout time Amount of time to lock-out the keypad once the number of incorrect PINs has been reached on the keypad. (Zwave is still active during lockout.)This is an advanced parameter and will therefore not show in the user interface without entering advanced mode. Values in the range 1 to 255 may be set.

The manufacturer defined default value is 60.

This parameter has the configuration ID config_7_1 and is of type INTEGER.

Parameter 8: Operation Mode

Operation Mode This is an advanced parameter and will therefore not show in the user interface without entering advanced mode. The following option values may be configured -:

Value Description
0 Normal
1 Vacation
2 Privacy
3 Disable Zwave

The manufacturer defined default value is 0 (Normal).

This parameter has the configuration ID config_8_1 and is of type INTEGER.

Lock Timeout

Sets the time after which the door will auto lock.

This parameter has the configuration ID doorlock_timeout and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The YRD246 supports 1 association group.

Group 1: Lifeline

This group supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_DOOR_LOCK_LOGGING_V1  
COMMAND_CLASS_SCHEDULE_ENTRY_LOCK_V1  
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1  
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1  
COMMAND_CLASS_ZWAVEPLUS_INFO_V1  
COMMAND_CLASS_DOOR_LOCK_V1  
COMMAND_CLASS_USER_CODE_V1  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_ALARM_V4  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_POWERLEVEL_V1  
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1  
COMMAND_CLASS_BATTERY_V1  
COMMAND_CLASS_ASSOCIATION_V2  
COMMAND_CLASS_VERSION_V2  
COMMAND_CLASS_TIME_V1  
COMMAND_CLASS_TIME_PARAMETERS_V1  
COMMAND_CLASS_SECURITY_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.