The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

YRD446 Yale Real Living Key Free Touchscreen Assure Lock with Z-Wave and Bluetooth

This describes the Z-Wave device YRD446, manufactured by ASSA ABLOY with the thing type UID of yale_yrd446_00_000.

The device is in the category of Lock, defining Devices whose primary pupose is locking something.

The YRD446 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the YRD446 -:

Channel Channel Id Category Item Type
Door Lock lock_door Door Switch
Auto Relock config_decimal   Decimal
Auto relock time config_decimal   Decimal
Operating mode config_decimal   Decimal
Alarm (access) alarm_access Door Switch
Alarm (power) alarm_power Door Switch
Alarm (raw) alarm_raw   String
Alarm (general) alarm_general Door Switch
Battery Level battery-level Battery Number
Clock Time Offset time_offset Temperature Number

Door Lock

Lock and unlock the door.

The lock_door channel supports the Switch item and is in the Door category.

Auto Relock

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Auto relock time

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Operating mode

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Alarm (access)

Indicates if the access control alarm is triggered.

The alarm_access channel supports the Switch item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value Label
OFF Ok
ON Alarm

Alarm (power)

Indicates if a power alarm is triggered.

The alarm_power channel supports the Switch item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value Label
OFF Ok
ON Alarm

Alarm (raw)

Provides alarm parameters as json string.

The alarm_raw channel supports the String item. This is a read only channel so will only be updated following state changes from the device.

Alarm (general)

Indicates if an alarm is triggered.

The alarm_general channel supports the Switch item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value Label
OFF Ok
ON Alarm

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The battery-level channel supports the Number item and is in the Battery category.

Clock Time Offset

Provides the current time difference for the devices time.

The time_offset channel supports the Number item and is in the Temperature category.

Device Configuration

The following table provides a summary of the 11 configuration parameters available in the YRD446. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Volume Volume of voice and beeps
2 Auto relock  
3 Auto relock time Time for auto relock
4 Incorrect PIN limit Number of incorrect PINs before lockout
5 Language  
7 Shutdown Shutdown time after wrong code entries
8 Operating mode  
11 One Touch Locking  
12 Privacy Button  
13 Lock Status LED  
15 Reset To Factory Defaults  
  Lock Timeout Sets the time after which the door will auto lock

Parameter 1: Volume

Volume of voice and beeps

The following option values may be configured -:

Value Description
1 Loud
2 Quiet
3 Silent

The manufacturer defined default value is 1 (Loud).

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Auto relock

The following option values may be configured -:

Value Description
0 No auto-relock
255 Auto relock

The manufacturer defined default value is 0 (No auto-relock).

This parameter has the configuration ID config_2_1 and is of type INTEGER.

Parameter 3: Auto relock time

Time for auto relock Number of seconds after the door is unlocked that it will attempt to automatically re-lock itself, if enabled. Values in the range 5 to 255 may be set.

The manufacturer defined default value is 30.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Incorrect PIN limit

Number of incorrect PINs before lockout Number of incorrect PINs that can be attempted before lock goes into temporary keypad lockout. Values in the range 1 to 7 may be set.

The manufacturer defined default value is 5.

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 5: Language

The following option values may be configured -:

Value Description
1 English
2 Spanish
3 French

The manufacturer defined default value is 1 (English).

This parameter has the configuration ID config_5_1 and is of type INTEGER.

Parameter 7: Shutdown

Shutdown time after wrong code entries

Values in the range 10 to 127 may be set.

The manufacturer defined default value is 60.

This parameter has the configuration ID config_7_1 and is of type INTEGER.

Parameter 8: Operating mode

The following option values may be configured -:

Value Description
0 Normal
1 Vacation
2 Privacy

The manufacturer defined default value is 0 (Normal).

This parameter has the configuration ID config_8_1 and is of type INTEGER.

Parameter 11: One Touch Locking

The following option values may be configured -:

Value Description
0 Off
255 On

The manufacturer defined default value is 255 (On).

This parameter has the configuration ID config_11_1 and is of type INTEGER.

Parameter 12: Privacy Button

The following option values may be configured -:

Value Description
0 Off
255 On

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_12_1 and is of type INTEGER.

Parameter 13: Lock Status LED

The following option values may be configured -:

Value Description
0 Off
255 On

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_13_1 and is of type INTEGER.

Parameter 15: Reset To Factory Defaults

The following option values may be configured -:

Value Description
1 Factory Reset

The manufacturer defined default value is 0.

This parameter has the configuration ID config_15_1 and is of type INTEGER.

Lock Timeout

Sets the time after which the door will auto lock.

This parameter has the configuration ID doorlock_timeout and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The YRD446 supports 1 association group.

Group 1: Lifeline

This group supports 1 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V0  
COMMAND_CLASS_DOOR_LOCK_LOGGING_V1  
COMMAND_CLASS_SCHEDULE_ENTRY_LOCK_V1  
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1  
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1  
COMMAND_CLASS_ZWAVEPLUS_INFO_V1  
COMMAND_CLASS_DOOR_LOCK_V1 Linked to BASIC
COMMAND_CLASS_USER_CODE_V1  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_ALARM_V4  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_POWERLEVEL_V1  
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V0  
COMMAND_CLASS_BATTERY_V1  
COMMAND_CLASS_ASSOCIATION_V2  
COMMAND_CLASS_VERSION_V2  
COMMAND_CLASS_TIME_V1  
COMMAND_CLASS_TIME_PARAMETERS_V1  
COMMAND_CLASS_SECURITY_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.