The openHAB Documentation Has Moved

The documentation has moved to and

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

Yale Smart Door Lock Z-Wave Module The Yale Smart Door Lock Z-Wave module allows you to control your Yale Connected Smart Door Lock from anywhere in the world when linked to a leading Z

This describes the Z-Wave device Yale Smart Door Lock Z-Wave Module, manufactured by ASSA ABLOY with the thing type UID of yale_zwavemodule_00_000.

The device is in the category of Lock, defining Devices whose primary pupose is locking something.

Yale Smart Door Lock Z-Wave Module product image

The Yale Smart Door Lock Z-Wave Module supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.


No device information is provided in the database. Consider updating the database to improve the documentation.


The following table summarises the channels available for the Yale Smart Door Lock Z-Wave Module -:

Channel Channel Id Category Item Type
Door Lock lock_door Door Switch
Alarm alarm_general Door Switch
Battery Level battery-level Battery Number
Clock Time Offset time_offset Temperature Number

Door Lock

Lock and unlock the door.

The lock_door channel supports the Switch item and is in the Door category.


Indicates if an alarm is triggered.

The alarm_general channel supports the Switch item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value Label
ON Alarm

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The battery-level channel supports the Number item and is in the Battery category.

Clock Time Offset

Provides the current time difference for the devices time.

The time_offset channel supports the Number item and is in the Temperature category.

Device Configuration

The device has no configuration parameters configured.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The Yale Smart Door Lock Z-Wave Module supports 1 association group.

Group 1: Alarm Reports

This group supports 4 nodes.

Technical Information


Endpoint 0

Command Class Comment

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.