The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

RGBWE27ZW RGBW bulb

This describes the Z-Wave device RGBWE27ZW, manufactured by Zipato with the thing type UID of zipato_rgbwe27zw_00_000.

RGBWE27ZW product image

The RGBWE27ZW supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the RGBWE27ZW -:

Channel Channel Id Category Item Type
Dimmer switch_dimmer DimmableLight Dimmer
Color Control color_color   Color
Color Temperature color_temperature ColorLight Dimmer

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.

Color Control

The color channel allows to control the color of a light. It is also possible to dim values and switch the light on and off.

The color_color channel supports the Color item.

Color Temperature

The color temperature channel allows to set the color temperature of a light from 0 (cold) to 100 (warm).

The color_temperature channel supports the Dimmer item and is in the ColorLight category.

Device Configuration

The following table provides a summary of the 5 configuration parameters available in the RGBWE27ZW. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Color temperature Values range from 0 to 100 where 0 is cold white and 100 is warm white.
2 Shock sensor sensitivity Range from 0 to 31 where 0 is minimum sensitivity and 31 is maximum sensitivity.
3 Strobe Light Interval Values range from 0 to 25 in intervals of 100 milliseconds.
4 Strobe Light Pulse Count Values range from 0 to 250 and a special value 255 which sets infinite flashing.
5 Enable or Disable Random Strobe Pulse Colors Values range are 0 (turn on) or 1 (turn off).

Parameter 1: Color temperature

Values range from 0 to 100 where 0 is cold white and 100 is warm white.

Values in the range 1 to 100 may be set.

The manufacturer defined default value is 50.

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 2: Shock sensor sensitivity

Range from 0 to 31 where 0 is minimum sensitivity and 31 is maximum sensitivity.

Values in the range 0 to 31 may be set.

The manufacturer defined default value is 16.

This parameter has the configuration ID config_2_1 and is of type INTEGER.

Parameter 3: Strobe Light Interval

Values range from 0 to 25 in intervals of 100 milliseconds.

Values in the range 0 to 25 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Strobe Light Pulse Count

Values range from 0 to 250 and a special value 255 which sets infinite flashing.

Values in the range 0 to 255 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 5: Enable or Disable Random Strobe Pulse Colors

Values range are 0 (turn on) or 1 (turn off).

The following option values may be configured -:

Value Description
0 turn off
1 turn on

The manufacturer defined default value is 0 (turn off).

This parameter has the configuration ID config_5_1 and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The RGBWE27ZW supports 1 association group.

Group 1: Lifeline

This group supports 7 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_SWITCH_MULTILEVEL_V2 Linked to BASIC
COMMAND_CLASS_SWITCH_COLOR_V1  
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V0  
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V0  
COMMAND_CLASS_ZWAVEPLUS_INFO_V0  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_POWERLEVEL_V0  
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V0  
COMMAND_CLASS_ASSOCIATION_V1  
COMMAND_CLASS_VERSION_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.