ZP3102 Multi Sensor Dual: motion and temperature sensor

This describes the Z-Wave device ZP3102, manufactured by Zipato with the thing type UID of zipato_zp3102_00_000.

Multi Sensor Dual: motion and temperature sensor

Overview

Presence detector and temperature meter in one device. Zipato Multisensor Duo offers elaborate security and ambient sensing options. The multifunctional nature of this product allows you to detect motion, and measure the room’s temperature. It can be used to automatically trigger other Z-Wave devices when activated.

Inclusion Information

Put  your  Z-Wave Controller into  “inclusion”  mode,  and  follow  the  instructions  to  add Multisensor  Duo  to  your  controller.  To  get  in  the  “inclusion”  mode, the distance between sensor and controller should be up to 1 meter. Press the program switch of Multisensor Duo once. The LED on the sensor should stop flashing, if not, please try again.

Exclusion Information

Put your Z-Wave Controller into “exclusion” mode, and follow the instructions to remove the Multisensor Duo from you controller network. Press the  program  switch  of  Multisensor  Duo  once  to be excluded. The LED on the Multisensor Duo should start to flash.

Wakeup Information

Remove the rear cover to wake up the device, or set the wake up interval time from 10 minutes to 1 week.  The battery will be drained quickly if you fail to replace the cover after using that method to wake up the device.

Channels

The following table summarises the channels available for the ZP3102 Multi Sensor Dual: motion and temperature sensor.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Sensor (temperature) sensor_temperature sensor_temperature Temperature Number
Alarm (burglar) alarm_burglar alarm_burglar Door Switch
  battery-level system.battery-level    

Sensor (temperature)

Scale

Select the scale for temperature readings

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Device Configuration

The following table provides a summary of the configuration parameters available in the ZP3102 Multi Sensor Dual: motion and temperature sensor. Detailed information on each parameter can be found below.

Parameter Description
1: On time in minutes Delay before sending OFF
2: Celsius / Fahrenheit 0 = Celsius, 1 = Fahrenheit
3: Infrared sensor sensitivity adjustment 1 is most sensitive, 7 is least
1: Control Command  

1: On time in minutes

Delay before sending OFF

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 1 to 255
Default Value 3

2: Celsius / Fahrenheit

0 = Celsius, 1 = Fahrenheit

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

3: Infrared sensor sensitivity adjustment

1 is most sensitive, 7 is least

Overview

(Parameter 3) Infrared sensor sensitivity adjustment, 7 levels sensitivity, 1 = most sensitive, 7 = most insensitive, default value= 4

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 1 to 7
Default Value 4

1: Control Command

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.