ZME_RC2 Z-Wave Remote Control+

This describes the Z-Wave device ZME_RC2, manufactured by Z-Wave.Me with the thing type UID of zwaveme_zmerc2_00_000.

Z-Wave Remote Control+

Channels

The following table summarises the channels available for the ZME_RC2 Z-Wave Remote Control+.

Channel Channel Id Channel Type UID Category Item Type
Scene Number scene_number scene_number   Number
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the ZME_RC2 Z-Wave Remote Control+. Detailed information on each parameter can be found below.

Parameter Description
10: Command to Control Group No1 (association group 2) This parameter defines the command to be sent to devices of control group No1 when the rel…
11: Command to Control Group No2 (association group 3) This parameter defines the command to be sent to devices of control group No2 when the rel…
12: Command to Control Group No3 (association group 4) This parameter defines the command to be sent to devices of control group No3 when the rel…
13: Command to Control Group No4 (association group 5) This parameter defines the command to be sent to devices of control group No4 when the rel…
14: Command to Control Group No5 (association group 6) This parameter defines the command to be sent to devices of control group No5 when the rel…
15: Command to Control Group No6 (association group 7) This parameter defines the command to be sent to devices of control group No6 when the rel…
16: Command to Control Group No7 (association group 8) This parameter defines the command to be sent to devices of control group No7 when the rel…
17: Command to Control Scene No1 (association group 9) This parameter defines the command to be sent to devices of control scene group No1 when t…
18: Command to Control Scene No2 (association group 10) This parameter defines the command to be sent to devices of control scene group No2 when t…
19: Command to Control Scene No3 (association group 11) This parameter defines the command to be sent to devices of control scene group No3 when t…
20: Command to Control group All On/Off (association group 12) This parameter defines the command to be sent to devices of control group All On/Off when …
21: Send the following Switch All commands Send the following Switch All commands
1: Lifeline. Send to controller battery level and WakeUp Notification  
2: The buttons of group No1  
3: The buttons of group No2  
4: The buttons of group No3  
5: The buttons of group No4  
6: The buttons of group No5  
7: The buttons of group No6  
8: The buttons of group No7  
9: The buttons of scene No1  
10: The buttons of scene No2  
11: The buttons of scene No3  
12: The buttons of All On/Off  

10: Command to Control Group No1 (association group 2)

This parameter defines the command to be sent to devices of control group No1 when the related button is pressed (association group 2)

Property Value      
Configuration ID config_10_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

11: Command to Control Group No2 (association group 3)

This parameter defines the command to be sent to devices of control group No2 when the related button is pressed (association group 3)

Property Value      
Configuration ID config_11_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

12: Command to Control Group No3 (association group 4)

This parameter defines the command to be sent to devices of control group No3 when the related button is pressed (association group 4)

Property Value      
Configuration ID config_12_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

13: Command to Control Group No4 (association group 5)

This parameter defines the command to be sent to devices of control group No4 when the related button is pressed (association group 5)

Property Value      
Configuration ID config_13_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

14: Command to Control Group No5 (association group 6)

This parameter defines the command to be sent to devices of control group No5 when the related button is pressed (association group 6)

Property Value      
Configuration ID config_14_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

15: Command to Control Group No6 (association group 7)

This parameter defines the command to be sent to devices of control group No6 when the related button is pressed (association group 7)

Property Value      
Configuration ID config_15_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

16: Command to Control Group No7 (association group 8)

This parameter defines the command to be sent to devices of control group No7 when the related button is pressed (association group 8)

Property Value      
Configuration ID config_16_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

17: Command to Control Scene No1 (association group 9)

This parameter defines the command to be sent to devices of control scene group No1 when the related button is pressed (association group 9)

Property Value      
Configuration ID config_17_1      
Data Type INTEGER   Default Value 4
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

18: Command to Control Scene No2 (association group 10)

This parameter defines the command to be sent to devices of control scene group No2 when the related button is pressed (association group 10)

Property Value      
Configuration ID config_18_1      
Data Type INTEGER   Default Value 4
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

19: Command to Control Scene No3 (association group 11)

This parameter defines the command to be sent to devices of control scene group No3 when the related button is pressed (association group 11)

Property Value      
Configuration ID config_19_1      
Data Type INTEGER   Default Value 4
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

20: Command to Control group All On/Off (association group 12)

This parameter defines the command to be sent to devices of control group All On/Off when the related button is pressed (association group 12)

Property Value      
Configuration ID config_20_1      
Data Type INTEGER   Default Value 3
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch All (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      

21: Send the following Switch All commands

Send the following Switch All commands

Property Value      
Configuration ID config_21_1      
Data Type INTEGER   Default Value 255
Options Switch off only (1)      
  Switch on only (2)      
  Switch all on and off (255)      

1: Lifeline. Send to controller battery level and WakeUp Notification

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: The buttons of group No1

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: The buttons of group No2

Property Value
Configuration ID group_3
Data Type TEXT
Range to

4: The buttons of group No3

Property Value
Configuration ID group_4
Data Type TEXT
Range to

5: The buttons of group No4

Property Value
Configuration ID group_5
Data Type TEXT
Range to

6: The buttons of group No5

Property Value
Configuration ID group_6
Data Type TEXT
Range to

7: The buttons of group No6

Property Value
Configuration ID group_7
Data Type TEXT
Range to

8: The buttons of group No7

Property Value
Configuration ID group_8
Data Type TEXT
Range to

9: The buttons of scene No1

Property Value
Configuration ID group_9
Data Type TEXT
Range to

10: The buttons of scene No2

Property Value
Configuration ID group_10
Data Type TEXT
Range to

11: The buttons of scene No3

Property Value
Configuration ID group_11
Data Type TEXT
Range to

12: The buttons of All On/Off

Property Value
Configuration ID group_12
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.