WD-100 In-Wall Dimmer

This describes the Z-Wave device WD-100, manufactured by Z Wave Products Inc. with the thing type UID of zwaveproducts_wd100_00_000.

In-Wall Dimmer

Channels

The following table summarises the channels available for the WD-100 In-Wall Dimmer.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number scene_number   Number

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the WD-100 In-Wall Dimmer. Detailed information on each parameter can be found below.

Parameter Description
4: Orientation Controls the on/off orientation of the rocker switch
7: Remote dim level increment Number of dim levels to change for each dim step when remotely commanded
8: Remote dim step duration Interval between dimming steps when remotely commanded
9: Dim Level Increment Indicates the number of levels (1-99) to change dimming each step
10: Step Duration The number of tens of milliseconds (1-255) to delay on each dimming step.
1: Group 1  

4: Orientation

Controls the on/off orientation of the rocker switch

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options Normal (0)      
  Inverted (1)      

7: Remote dim level increment

Number of dim levels to change for each dim step when remotely commanded

Property Value
Configuration ID config_7_1
Data Type INTEGER
Range 1 to 99
Default Value 1

8: Remote dim step duration

Interval between dimming steps when remotely commanded

Property Value
Configuration ID config_8_2
Data Type INTEGER
Range 1 to 255
Default Value 3

9: Dim Level Increment

Indicates the number of levels (1-99) to change dimming each step

Property Value
Configuration ID config_9_1
Data Type INTEGER
Range 0 to 255
Default Value 1

10: Step Duration

The number of tens of milliseconds (1-255) to delay on each dimming step.

Property Value
Configuration ID config_10_2
Data Type INTEGER
Range 0 to 255
Default Value 3

1: Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.