Serial Binding

The Serial binding allows openHAB to communicate in ASCII over serial ports attached to the openHAB server.

Item Type Function
Switch the item will update its state to ON or OFF whenever data becomes available on the serial interface (or simply by short-cutting pins 2 and 7 on the RS-232 interface)
String the item will update its state to a string that is the data received from the serial interface. Sending a command to the String item will be sent out as data through the serial interface.
Number the item will receive the RegEx result and attempt to convert the string to a number.

Port Configuration Notes

In most cases you will not need to perform special steps to access your serial ports, but these notes might be helpful.

Linux Users

  • If you are using non standard serial ports you have to adapt to have the serial port included. The java command line should then include the following parameters:

where /dev/ttyAMA0 is the path to your serial port. Please be aware to change all scripts you might use for startup (debug, automatic start in Linux, etc.).

  • Your Linux distro might require that you add the openhab user to the dialout group to grant permission to read/write to the serial port.
sudo usermod -a -G dialout openhab

The user will need to logout from all login instances and log back in to see their new group added. If you add your user to this group and still cannot get permission, rebooting the box to ensure the new group permission is attached to your user is suggested.

  • If you use more than one USB serial converter like FTDI or CP2102, it may happen that your /dev/ttyUSB0 device is named /dev/ttyUSB1 after a reboot. To prevent this problem you can assign alias names for your serial devices by adding them to /etc/udev/rules.d/99-com.rules.


SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="AE01F0PD", SYMLINK+="ttyMySensors"
SUBSYSTEM=="tty", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", ATTRS{serial}=="0001", SYMLINK+="ttyCulStick"

Mac Users

If you are working with a Mac, you might need to install a driver for your USB-RS232 converter (e.g. osx-pl2303 or pl2303) and create the /var/lock folder, see the rxtx troubleshooting guide.

Binding Configuration

This binding does not have a configuration.

Item Configuration

The format has the following variations:

serial="<port>@<baudrate>,REGEX(<regular expression>)" 
serial="<port>@<baudrate>,ON(<On string>),OFF(<Off string>)" 
serial="<port>@<baudrate>,REGEX(<regular expression>), UP(<Up string>),DOWN(<Down string>), STOP(<Stop string>)" 


  • <port> is the identification of the serial port on the host system, e.g. COM1 on Windows, /dev/ttyS0 on Linux or /dev/tty.PL2303-0000103D on Mac. The same <port> can be bound to multiple items.
  • <baudrate> is the baud rate of the port. Backward compatibility is given; if no baud rate is specified the serial binding defaults to 9600 baud.
  • REGEX(<regular expression>) allows parsing for special strings or numbers in the serial stream. You can use a capture group (e.g. REGEX(Position:([0-9.]*)) to capture 12 in “Position:12” or substitution (e.g. REGEX(s/Position:100/ON/) or REGEX(s/Position:100/ON/g)) to replace (FIRST or ALL) “Position:100” strings in response with “ON”. This is based on the RegEx Service and ESH RegExTransformationService. This is optional.
  • BASE64 enables the Base64 mode. With this mode all data received on the serial port is saved in Base64 format. In this mode also all data that is sent to the serial port has to be Base64 encoded. (This was implemented because some serial devices are using bytes that are not supported by the REST interface).
  • ON(<On string>),OFF(<Off string>) if used in conjunction with a Switch this mapping will send specific commands to serial port and also match a serial command to specific ON/OFF state. This way you don’t have to use a rule to send a command to serial
  • UP(<Up string>),DOWN(<Down string>),STOP(<Stop string>) if used in conjunction with a Rollershutter this mapping will send specific commands to serial port. Use REGEX to parse Rollershutter postion (0-100%) comming as feedback over serial link

Base64 can be decoded in the rules by importing javax.xml.bind.DatatypeConverter and then decoding the value like this:


For encoding use the printBase64Binary method of the DatatypeConverter. This is optional.

As a result, your lines in the items file might look like these:

Switch         HardwareButton     "Bell"              (Entrance)      { serial="/dev/ttyS0" }
String         AVR                "Surround System"   (Multimedia)    { serial="/dev/[email protected]" } 
Number         Temperature        "My Temp. Sensor"   (Weather)       { serial="/dev/[email protected],REGEX(ID:2.*,T:([0-9.]*))" } 
Switch         SerialRelay        "Relay Q1"          (Entrance)      { serial="/dev/ttyS0,ON(Q1_ON\n),OFF(Q1_OFF\n)" }
Rollershutter  SerialRollo        "Entrance Rollo"    (Entrance)      { serial="/dev/ttyS0,REGEX(Position:([0-9.]*)),UP(Rollo_UP\n),DOWN(Rollo_Down\n),STOP(Rollo_Stop\n)" }
Switch         RoloAt100          "Rolo at 100"       (Entrance)      { serial="/dev/ttyS0,REGEX(s/Position:100/ON/)" }