SMA Energy Meter Binding

This Binding is used to display the measured values of a SMA Energy Meter device. It shows purchased and grid feed-in power and energy.

Supported Things

This Binding supports SMA Energy Meter devices.


The Energy Meter is discovered by receiving data on the default multicast IP address.

Binding Configuration

No binding configuration required.

Thing Configuration

Usually no manual configuration is required, as the multicast IP address and the port remain on their factory set values. Optionally, a refresh interval (in seconds) can be defined.


  • powerIn Purchased power [W]
  • powerOut Grid feed-in power [W]
  • energyIn Purchased energy [kWh]
  • energyOut Grid feed-in energy [kWh]

Full example